Owner`s manual

TOYOTA Scion FR-S System 400
Procedure!
Issue A 06/01/12 Page | 18!
! !
!
!
Checklist –

Check:
Vehicle Function Detail:
Power Windows
Verify power window controls are functioning properly.
Power Door Locks
Verify power door lock controls are functioning properly.
Hazard Lights
Verify hazard lights are functioning properly.
Clock
Verify proper time on clock.
Radio
Verify radio is functioning properly.
Navigation (if applicable)
Verify navigation system is functioning properly.
Bluetooth (if Applicable)
Verify Bluetooth is functioning properly.
!
These points MUST be checked to ensure a quality installation.!
Basic Troubleshooting Tips
In most cases, issues with the OEM Audio Plus sound system upgrade are
installation related. We have found that these few simple troubleshooting
steps have resolved customer issues.
1. Double-check all Amplifiers and Radio connections - Unplug each
connector then re-plug to confirm secure connection. Listen and feel
for the locking “click”. This is the most common issue.
2. Verify Radio Connections - Make sure that the male factory harness
connectors are plugged to female OEM Audio Plus harness
connectors and the male OEM Audio Plus harness connectors are
plugged directly to the radio.
3. Check the fuses.
4. Check the Amplifier ground connection.
5. Reset the DSP Amplifier - Disconnect the (-) negative terminal from the
battery for one hour.
6. Check the wiring – Look out for pinched or damaged wires that may
have occurred during installation.
7. If all else fails - Bypass the OEM Audio Plus sound system by restoring
the factory connections to the radio and contact the OEM Audio Plus
technical support line at 1-855-OEM-ODIO ext. 601.