Owner`s manual

TOYOTA Scion FR-S System 400
Procedure!
Issue A 06/01/12 Page | 15!
! !
!
!
2. Insert 12 ga. Power Wire into Yellow butt
connector. Insert 14 ga. Power Wire into Blue
butt connector. Crimp and apply heat to both
butt connectors to activate the solder and heat
shrink insulator for the best connection
possible. (Fig. 7-2)
8. Fuse Installation
a. Insert the 20A fuse for the 14 ga. power wire
(thinner wire) and the 30A fuse for the 12 ga.
power wire. (Fig. 8-1)
9. Connect Battery ground (-). (Fig. 9-1)
10. Set Clock to correct time.
11. Verify Radio Settings.
a. Pioneer Standard Radio (PT546-00120)
1. Turn radio off then press and hold "Settings"
Select "Car Type" > "tC" in "Setup" (Fig. 11-1)
(Pg. 52 Radio owner’s manual) NOTE: Setting
Car type to FR-S will result in a balanced
sound reproduction.
1. Doubl
e-