Owner`s manual

TOYOTA Scion FR-S System 400
Procedure!
Issue A 06/01/12 Page | 12!
! !
!
!
5. Amplifier and Subwoofer Installation
a. Amplifier Connection
1. Plug the white 22-pin connector to the upper
receptacle and the gray 22-pin connector to
the lower receptacle of the DSP Amplifier
(larger amp). Plug the black 10-pin connector
to the bottom receptacle on the Sub Amplifier
(smaller amp). IMPORTANT: Make sure all
connectors are fully inserted and securely
locked (listen for a locking click – Pull on
harness lightly to confirm secure connection).
(Fig. 5-1)
b. Subwoofer Installation
1. Use a plastic panel tool to remove the push in
snap on the passenger side of the trunk.
(Fig. 5-2)
2. Install the smaller size ¼-20 speed nut on the
mounting hole. (Fig. 5-3)
3. Locate the 2-hole bracket behind the
passenger side trunk carpet panel. Use pliers
to flatten out the bracket behind the 2-hole
bracket. (Fig. 5-4)