Owner`s manual

TOYOTA Scion FR-S System 400
Procedure!
Issue A 06/01/12 Page | 11!
! !
!
!
16. Lift carpet by disengaging the white plastic clips
in the driver side threshold area and continue
routing the harness underneath the carpet
towards the driver sidekick panel area. Re-
install carpet clips and weather-stripping.
(Fig. 4-23)
17. Route the Quick-Sync harness under the driver
side dash and towards the radio cavity. (The
two yellow power wires must remain separate
in the driver-side kick panel for now). Secure the
harness to the existing gray factory wires using
cable ties. (Fig. 4-24)
18. Route the harness towards the radio cavity
until connectors are visible. (Fig. 4-25)
19. Connect the Quick-Sync harness to the factory
harness and radio (10-pin and 6-pin
connectors). Make sure they are fully inserted
and securely locked in place. (Fig. 4-26)
20. Re-install the radio and trim panel.