Specifications

P/N: 4TF020-010 v2.1, 05/14/2013

E. Install the airbox assembly onto the supercharger inlet and

vehicle. Align the airbox to the mounting holes, forward

facing inlet duct and previously installed airbox mounting

bracket. See Figs. 10C, 10D, 10E. Use two (2) of the OEM

screws to secure the airbox to the forward OEM mount

locations. Secure the tab located on the driver side using the

supplied M6 x 20 screw and nut.

F. Tighten hose clamps at supercharger interface.

Fig. 10C

Fig. 10E

Fig. 10D