Specifications

P/N: 4TF020-010 v2.1, 05/14/2013
©2013 Vortech Engineering, Inc
All Rights Reserved, Intl. Copr. Secured
28
E. Remove the OEM hood release cable
retainer from the chassis mounting hole.
See Fig. 6C.
F. Attach the modified filler neck and hose
to the vehicle. Use the supplied M6 x 12
screw with washer and nut to secure
the assembly into to the hole previously
occupied by the hood release cable.
Align as shown. See Fig. 6D.
SUBARU BRZ APPLICATIONS ONLY:
• Instead of the M6x12 screw, use
the supplied M6x25 screw and
.45" space between the filler neck
tab and chassis mount. See Fig.
6D-1.
• Use a file to lightly clearance
corner of headline housing as
shown See Fig. 6D-2.
Fig. 6C
Fig. 6D
HOOD LATCH
CABLE LOCATION
(SUBARU BRZ ONLY) Fig. 6D-1 (SUBARU BRZ ONLY) Fig. 6D-2