Unit installation

2008 SCION xB TESTING & EVALUATION
Procedure
Issue A: 04/28/08 Page 45 of 48
(i) Use the diagnostic Techstream tool to check for
ECU error codes.
(j) Complete and mail the warranty registration
card. Note: The installation of the
Supercharger is not complete until this card
has been returned to TRD.
(k) Place all removed factory hardware,
components, and this instruction sheet into the
original TRD kit box and give to the customer
and / or place it in the vehicle cargo
compartment.
(l) IMPORTANT: Review with the customer/end-
user that the supercharger will have a slight
rattling and or chirping sound especially at idle
and that these are normal noises for this type
of supercharger.
(m) IMPORTANT: Review with the
customer/end-user that it is it is imperative that
only 91 octane (or higher) fuel be used after
the supercharger is installed. Performance will
suffer and engine damage is possible otherwise.