Unit installation

2008 SCION xB BATTERY RELOCATION

Procedure

Issue A: 04/28/08 Page 39 of 48

19. Battery Relocation-Installation

(a) Loosely install the supplied TRD battery ground

cable relocation bracket to the vehicle using the

O.E. fastener (Fig. 19-1)

(

b) Install the supplied battery hold-down stud with

washer and jam nut through the ground cable

relocation bracket and into the air inlet bracket.

Tighten the jam nut and O.E. fastener at this

time. Torque O.E. fastener to 80 in-lbs. (Fig.

19-1)

secure the O.E. ground cable to the relocation

bracket. Torque fastener to 80 in-lbs. (Fig. 19-

(d) Install the supplied plastic battery tray spacer.

(Fig. 19-2)

(e) Reinstall the battery plastic tray, battery, and

battery cover, and secure it with the TRD

supplied battery tie down bracket and hardware.

Torque fastener to 80 in-lbs.

NOTE: Be sure to locate battery in battery

ray all the way forward AND all the way

toward the driver side of the tray to allow

maximum supercharger clearance. (Fig. 19-3)