Unit installation

2008 SCION xB AIR INLET AND DISCHARGE
INSTALLATION
Procedure
Issue A: 04/28/08 Page 31 of 48
18. Air Inlet and Discharge System
(a) Install the Ø2.5” X 2.25” long sleeve onto the
throttle body and secure using the provided
clamp. (Fig 18-1).
(
b) Locate the molded Ø2.5” X 45° sleeve and
attach the longer leg to the supercharger.
Position as shown and rotate as needed and
secure. (Fig 18-1).
(c) Connect the two sleeves using the Ø2.5 X 90°
aluminum tube and secure using the supplied
60-80mm hose clamps. (See Fig 18-2).
(d) Fit intake manifold O-Ring to supercharger
assembly. Be sure to use some assembly lube or
motor oil on O-Ring prior to installation. (Fig.
1
8-3).
Fig. 18
-
3