Unit installation

2008 SCION xB OIL PRESSURE ADAPTER

Procedure

Issue A: 04/28/08 Page 16 of 48

(e) Place a light coat of oil to the AN threads on the

oil feed fitting. Attach the 90 degree side of the

oil feed hose to the oil “t”-fitting (9/16”

wrench).

(f) Thread the oil line between the heater hoses as

shown in (Fig 8-5). Tighten the AN fitting

hile holding the “t” fitting in position with a

7/8” wrench. Do NOT use Teflon tape on AN

fittings. Cover open end of line until

connection is made in later step.

ig. 8

9/16”

7/8”