Unit installation

2008 SCION xB STARTER REMOVAL
Procedure
Issue A: 04/28/08 Page 14 of 48
7. Starter and Hardware Removal
(a) Disconnect starter motor wires (12mm socket)
and remove the two starter-motor mounting
bolts (14mm socket). Remove the starter motor
and set it aside for now. (Fig. 7-1).
(
b) Remove two OE transmission bell-housing bolts
(17 mm wrench) as shown in Figure 7-2. These
will NOT be re-used.
Fig. 7-1
14 & 12mm
sockets
Fig. 7
-
2
Remove these
2 Fasteners
17 mm