Owner`s manual

SCION tC 2007 - SECURITY (V5)
Procedure
Page 9 of 28 pages
Issue: B 02/27/06
(n) Insert the terminal at the end of the vehicle
harness’ ORANGE wire into the opening of
the empty 1P connector, then close the
retainer. (Fig. 2-10)
(1) The terminal should not come out when
pulled lightly from the back. If it does,
push it in again.
(o) Insert the terminal at the end of the V5
harness’ ORANGE wire into the top row,
first space from the left of the vehicle
harness’ 17P connector, then close the
retainer. (Fig. 2-11)
(1) Turn the connector so the wires face you
and the tab is on top.
(2) Verify the correct wire is chosen.
(3) Verify the terminal is inserted and seated
properly.
(4) The terminal should not come out when
pulled lightly from the back. If it does,
push it in again, until securely seated.
(p) Plug in the 1P connectors, and then reconnect
the 17P connector. Secure the 1P connectors
and the V5 harness to the vehicle harness
with one wire tie. (Fig. 2-12)
Fig. 2-11
17P
V5 Harness’ ORANGE
Wire Terminal
Vehicle
Harness
V5 Harness
17P
Wire Side View
Retainer
Fig. 2-12
Wire Tie
17P
1P
1P
V5 Harness
Side Cutte
r
Fig. 2-10
Vehicle Harness’
ORANGE Wire
Terminal
1P (Female)
Retainer
Tab
17P
Vehicle Harness