Owner`s manual

SCION tC 2007 - SECURITY (V5)
Procedure
Page 19 of 28 pages
Issue: B 02/27/06
(c) Locate the vehicle harness’ white 1P
connector above the passenger side cowl
area. The plug the V5 harness’ white 1P
female connector into the vehicle harness’
white 1P male connector. (Fig. 7-3)
(d) Secure the V5 harness to the vehicle harness
with one wire tie. (Fig. 7-3)
(e) Secure the 1P connector and V5 harness to
the vehicle harness with one wire tie.
(Fig. 7-3)
(f) Locate and disconnect the white 10P and
white 20P connectors from the passenger
side cowl area. (Fig. 7-4)
(1) If the 10P connector harness is secured to
the vehicle harness with breakaway tape,
then cut the breakaway tape.
(g) Plug in the V5 harness’ white 10P connectors
between the vehicle harness’ 10P connector
and the passenger side cowl area. (Fig. 7-5)
(1) Verify the connectors are plugged in
securely.
(h) Plug in the V5 harness’ white 20P connectors
between the vehicle harness’ 20P connector
and the passenger side cowl area. (Fig. 7-5)
(1) Verify the connectors are plugged in
securely.
(i) Secure the V5 harness’ 10P and 20P
connectors to the vehicle harness with one
wire tie. (Fig. 7-6)
Fig. 7-3
Wire Ties (x2)
Side Cutter
V5 Harness
V5 Harness’ Female 1P
Vehicle Harness’ Male 1P
Fig. 7-4
10P (White)
20P (White)
Fig. 7-5
20P
10P
40P
8P
V5 Harness
Fig. 7-5
20P
10P
40P
8P
V5 Harness
Side Cutte
r
40P
8P
Wire Tie
10P
20P
V5 Harness
Fig. 7-6