Owner`s manual

SCION tC 2007 - SECURITY (V5)
Procedure
Page 16 of 28 pages
Issue: B 02/27/06
(r) Refit the 30P connector’s lock cover.
(Fig. 4-11)
(s) Reconnect 30P connector to the driver side
J/B.
(t) Plug the V5 harness’ 2P male connector into
the V5 harness’ 2P female connector.
(Fig. 4-12)
(1) Verify the connectors are plugged in
securely.
(u) Secure the 2P connectors to the vehicle
harness with one wire tie. (Fig. 4-12)
(v) Secure the V5 harness to the vehicle harness
behind the driver side J/B with one wire tie.
(Fig. 4-13)
5. Status Monitor Installation.
(a) Insert the status monitor into the open
knockout space of the cluster panel.
(Fig. 5-1)
(1) Ensure the correct knockout space is
chosen.
Fig. 4-11
30P
Connector Cover
Vehicle Harness
V5 Harness
Fig. 4-13
Driver Side J/B
V5 Harness
Side Cutter
Wire Tie
Vehicle Harness
Fig. 4-12
2P
Driver Side J/B
Wire Tie
V5 Harness
Side Cutter
Vehicle Harness
Fig. 5-1
Status Monitor
Cluster Panel