Owner`s manual

SCION xA 2006 - SECURITY WITH RKE (V3)
Procedure
Page 12 of 22 pages
Issue: C 05/24/05
DIO
(g) Plug in the V3 harness' white 1P connector to
the vehicle harness' white 1P connector.
(Fig. 6-7)
(1) Verify the connectors are plugged in
securely.
(h) Secure the 1P connectors to the vehicle
harness with one medium wire tie. (Fig. 6-7)
(i) Secure the V3 harness to the vehicle harness
with two medium wire ties. (Fig. 6-7)
(j) Route and secure the V3 harness to the
reinforcement with two large wire ties.
(Fig. 6-8)
(k) Route and secure the V3 harness to the
vehicle harness with three medium wire ties
above the passenger side cowl area.
(Fig. 6-8)
(l) Locate and disconnect the white 14P
connector from the passenger side cowl area.
(Fig. 6-9)
(m) Plug in the V3 harness' white 14P connectors
between the vehicle harness' white 14P
connector and the passenger side cowl area.
(Fig. 6-10)
(1) Verify the connectors are plugged in
securely.
(n) Secure the 14P connectors to the vehicle
harness with one medium wire tie.
(Fig. 6-10)
Fig. 6-7
Side Cutter
Medium Wire
Ties (x3)
V3 Harness
1P (White)
Fig. 6-9
14P (White)
Side Cutter
V3 Harness
14P
(
White
)
Fig. 6-10
Side Cutter
V3 Harness
Medium Wire Tie
14P
(
White
)
Fig. 6-8
Reinforcement
Large Wire Ties (x2)
Side Cutter
Medium
Wire Ties
(
x3
)
V3 Harness