SK-O(L)330- Pro Orbital and Linear Digital Shaker SK-O(L)180- Pro Orbital and Linear Digital Shaker User Manual SK-L330-Pro SK-O330-Pro SK-L180-Pro SK-O180-Pro Linear Digital shaker(7.5Kg) Orbital Digital shaker(7.5Kg) Linear Digital shaker(2.5Kg) Orbital Digital shaker(2.5Kg) Please read the User Manual and the related Video of this instrument on our website carefully before use, and follow all operating and safety instructions! The website www.scilogex.com Cat No.
Contents Contents Preface Service Warranty 1.Safety Instructions 2.Proper Use 3.Inspection 3.1 Receiving Inspection 3.2 Listing of Items 4. Trial Run 5.Control and Set 5.1 Control 5.2 Set 5.2.1 Set Time 5.2.2 Setting Speed 6.Operating Modes 6.1 Mode A 6.2 Mode B 6.3 Switching the Mode 6.4 Switch the shaking direction 7.Supported Load 8.Faults Inside front cover 1 1 1 2 3 3 3 3 3 4 4 5 5 5 6 6 7 7 8 8 8 9.Interface 10.Maintenance and Cleaning 11.Associated Standards and Regulations 12.Technical Data 13.
SK-O(L)330- Pro Orbital and Linear Digital Shaker SK-O(L)180- Pro Orbital and Linear Digital Shaker • Methods and procedures adopted to resolve the problems • Your contact information Preface Welcome to the“Orbital and Linear Digital Shaker User Manual”. Users should read this manual carefully, follow the instructions and procedures, and beware of all the cautions when using this instrument. Warranty You have purchased a Scilogex instrument.
SK-O(L)330- Pro Orbital and Linear Digital Shaker SK-O(L)180- Pro Orbital and Linear Digital Shaker splashing out of liquid when setting the motor speed. Reduce the motor speed if the instrument is not running smoothly. • Accessories must be securely attached to the instrument so that it cannot come off by itselves, and vessels must be firmly placed on the shaking table to avoid any injury. • Working with combustible media or flammable materials may result in additional hazards.
SK-O(L)330- Pro Orbital and Linear Digital Shaker 2.Proper use SK-O(L)180- Pro Orbital and Linear Digital Shaker Items The instrument is designed for mixing or shaking liquids in schools, laboratories or factories. SK-330/180-Pro is suitable for usage in various attachments for mixing liquids in bottles, flasks, test tubes for a maximum supported weight of 7.5 kg(330)and 2.5Kg(180).
SK-O(L)330- Pro Orbital and Linear Digital Shaker SK-O(L)180- Pro If the mounting surface is not even, you can improve the stability of the instrument with the adjustable feet. To do this, turn the appropriate foot downward with the wrench until the instrument is standing securely on the surface. Orbital and Linear Digital Shaker 5.Control and Set 5.
SK-O(L)330- Pro Orbital and Linear Digital Shaker • Put the instrument on stable and safe place and plug in the mains power. • Turn ON the mains switch on the left panel. • The instrument starts self-test. • The instrument shows rated speed and time after initialization. • Turn the speed knob on the left side to set the rated speed. • Press the speed knob and characters on the left LCD do not flash any more, and the shaking function is switched ON.
SK-O(L)330- Pro Orbital and Linear Digital Shaker SK-O(L)180- Pro Orbital and Linear Digital Shaker Note: The current set speed can be varied at any time. Figure 4 • The set or stored speed value is shown in the left display, and the set or stored time value is shown in the right display. Turn the speed knob and time knob can set the speed and time. 6.Operating modes 6.1 Mode A Operating mode A is the default mode set in factory.
SK-O(L)330- Pro Orbital and Linear Digital Shaker SK-O(L)180- Pro Orbital and Linear Digital Shaker 6.2 Mode B When the instrument is turned ON and values for speed and time are erased to zero, users can set. The upper speed limit that has been set is taken over from operating mode A and cannot be modified. After the power has been turned OFF, the instrument will no longer automatically start up in operating Mode B by itself.
SK-O(L)330- Pro Orbital and Linear Digital Shaker SK-O(L)180- Pro the mains switch. After about 5 second, you can let go of the knobs. • Switch between operating Modes A and B in order. Orbital and Linear Digital Shaker Check whether the power cable fitted well Check whether the fuse is broken • The speed cannot reach set value ■ Check whether it is overloaded • The motor does not start via pressing the speed knob and time knob ■ Check whether the time is set to zero ■ ■ 6.
SK-O(L)330- Pro Orbital and Linear Digital Shaker Use and maintain the instrument in right way to keep it in good operating state in order to lengthen its life time and avoid the damage to the instrument. Only use the cleaning agents which have been approved by manufacturer to clean the instrument.
SK-O(L)330- Pro Orbital and Linear Digital Shaker SK-O(L)180- Pro 12.Technical data Items Parameters Voltage [VAC] 100~240 Frequency [Hz] 50/60 Power [W] 30 Shaking movement Orbital/ linear Orbital diameter [mm] 10(SK-O(L)330-Pro)/ 4.
SK-O(L)330- Pro Orbital and Linear Digital Shaker 13.Products and Accessories Cat.No 831010019999 831010039999 831010049999 Cat.No Descriptions SK-L180-Pro Linear Digital Shaker (2.5Kg),No Attachment, Cn plug, 110/220/50Hz/60Hz SK-L180-Pro Linear Digital Shaker (2.5Kg),No Attachment, Euro plug, 110/220/50Hz/60Hz SK-L180-Pro Linear Digital Shaker (2.5Kg),No Attachment, UK plug, 110/220/50Hz/60Hz 831010059999 SK-L180-Pro Linear Digital Shaker (2.
SK-O(L)330- Pro Orbital and Linear Digital Shaker SK-O(L)180- Pro Orbital and Linear Digital Shaker Descriptions 18900041 832010069999 SK-O330-Pro Orbital Digital Shaker (7.5 Kg),No Attachment, Euro plug, 110V/220V/50Hz/60Hz SK330.4 832010079999 SK-O330-Pro Orbital Digital Shaker (7.5 Kg),No Attachment, UK plug, 110V/220V/50Hz/60Hz 832010089999 SK-O330-Pro Orbital Digital Shaker (7.5 Kg),No Attachment, USA plug, 110V/220V/50Hz/60Hz Cat.No 18900028 SK 330.
SK-O(L)330- Pro 18900026 SK 180.2 18900037 18900029 SK330.2.1 18900030 SK330.2.2 18900031 SK330.2.3 Orbital and Linear Digital Shaker SK 180.2 Fixing Clip Attachment SK-O(L)180- Pro Orbital and Linear Digital Shaker 18900032 SK330.2.4 Fixing Clips for F l a s k Vo l u m e 200/250 ml Bars for SK180.
SCILOGEX, LLC 500 Four Rod Road Suite 122 Berlin, CT 06037 USA Tel:1- (860) 828-5614 Fax:1- (860) 828-5389 E-mail: info@scilogex.com Website:Http://www.scilogex.