Owner manual

7
Digital (Enhanced) Overhead Stirrer
Power switch /Overload
protection light
Power/Overload
Green/Red LED display light.
LED light shows green when
switch on, LED light shows
red w he n st a rt s ove rlo ad
protection. When the torque
reaches limited value, overload
protection function will be
start ed. At th e same ti me
ov erl oa d p ro tec ti on lig ht
flashes, while the system stops
running.
Drill chuck Can be held stirring impellers.
Power switch I/O
S w i t c h O N o r O F F t h e
instrument.
Table 2
•
Place the overhead stirrer in safe and stable surface and
connect power cable.
•
Switch ON instrument.
•
The instrument begins self-checking.
•
When initialization is over, displays“set”, at the same
time the area of value setting/display flashes that indicate
can be set speed value.
•
Rotate speed control button to set stirring speed.
•
LCD display no longer flashes when press speed button,
“set”disappear, the stirring function starts.
•
Press speed button again, LCD display flashes,“set”
display, the stirring function close.
6.2 Display
Figure 4
Display Descriptions
Set
Display when set target speed
value.
PC
Display when using external
probe.
Err
Dis play in case of er ror
happening.
Value set/display area
When Set display, this area
shows setting value; When
Set disappears, this area
shows running value.
Table 3