User guide

4
MX-M Microplate Mixer
5 Control
Power
LED
Adapter
Speed control Knod
Figure 3
6 Maintenance and cleaning
Proper maintenance can keep instruments working in a
good state and lengthen its lifetime. Be careful not spray the
cleanser into the instrument when cleaning.
Unplug the power line when cleaning.Only use cleanser that
we advised as below:
Dyes isopropyl alcohol
Construction
materials
Water containing tenside / isopropyl alcohol
Cosmetics Water containing tenside / isopropyl alcohol
Foodstuffs Water containing tenside
Fuels Water containing tenside
• Before using other method for cleaning or decontamination,
the user must ascertain with the manufacturer that this method
does not harm or destroy the instrument.
• Wear the proper protective gloves during cleaning of the
instrument.
• Forbid to place the instrument in the cleanser to clean
• The instrument must be cleaned and put i
t into the initial
packaging carton before sending to service for repair,
avoiding the contamination of hazardous.
• Switch off the device and put it in the dry, clean, stable
place at room temperature in long-term disuse.
7 Associated standards and regulations
Construction in accordance with the following safety standards:
EN 61010-1
Construction in accordance with the following EMC
standards:
EN 61326-1
Associated EU guidelines:
EMC-guidelines: 89/336/EWG
Machine guidelines: 73/023/EWG