User guide

2
MX-M Microplate Mixer
1 Safety Instructions
Warning!
• Read the operating instructions in
full before use and follow the safety
instructions
• Ensure that only trained staff work with
the appliance.
Protective ground contact！
• Make sure that socket is earthed
(protective ground contact) before use.
• When work ，wear the personal guard to avoid the risk
from:
- Splashing of liquids.
- Release of toxic or combustible gases.
• Set up the instrument in a spacious area on an even,
stable,clean, non-slip, dry and fireproof surface, do not
operate the instrument in explosive atmospheres, w
ith
hazardous substances or under water.
• Gradually increase the speed, reduce the speed if :
- The medium splashes out of the vessel because of too
high speed.
- The instrument is not running smoothly.
• Beware of hazards due to:
- Overfilling of media
- Unsafe container
• Process pathogenic materials only in closed vessels.
• Always disconnect the plug before fitting accessories.Do
n
ot use damaged components.
• The operating voltage required on the type plate and
voltage supply network must match.
• Ensure that the mains power supply cable does not touch
the hotplate. Do not cover the instrument.
• The instrument may only be opened by experts .
• Observe the minimum distances between the devices,
between the instrument and the wall and above the assembly
(min. 100 mm).
>100mm
>100mm
Figure 1