Brochure

The Scilogex D160 Homogenizer can rapidly homogenize, disperse, and emulsify
samples in 0.1 - 50 ml of liquid or 1-250ml depending on the generating probe.
During operation, the suspended material is drawn into the core of the
homogenizer by a rotor turning at up to 30,000 rpm. The material is repeatedly cycled
through narrow slits in the probe where it is rapidly sheared and disintegrated by high
shear. Complete homogenization of tissues (muscle, liver, breast tissue, etc.) is usually
achieved in a few seconds. Little, if any, heat is produced during the process.
Features:
U
se for mixing, emulsication, shredding, or chopping.
Practical answer for small samples.
Easy to hold and light weight for one hand operation.
Generators are made of 316 L Stainless Steel with Teon bushings.
Autoclavable stainless steel shafts. Inert to aggressive solutions.
All shafts are interchangeable shafts and are easily removed for cleanup.
High speed motor. Speed control from 8,000 to 30,000 rpm.
Suitable for solvents & abrasive substances.
Specications:
Working Volume (ml): 0.1 - 250ml
Operating Environment: 0-40°C, 95% rel. humidity
Motor type: Universal motor, 130 Watt
Voltage /Frequency: 110V/60Hz
Certied standards: 89/336EEC,72/023/EEC, EMC acc. IEC/EN 61000-6-2 / 3,
Safety acc. IEC/EN 61010-2-51
Speed range (rpm): 8,000 - 30,000
Warranty: 2 years
Speed control: 6 position control dial
Noise emission: < 54 dB(A) at 30,000 rpm
pH Range: 2-13
Dimensions (mm): 250L x 250W x 400H
Weight (kg) 1.6
Fineness, (μm) Suspensions & Emulsion 10-15 & 1-10
Ordering Information:
Cat No. Description
85010101 SCILOGEX D160 Homogenizer Package, DS-160/5 5mm dia. generator,
at head-open slot, 50mm immerse length, H-370 stand, for solid/liquid
media, volumes 0.1-50ml, 110V, 60Hz
85010201 SCILOGEX D160 Homogenizer Package, DS-160/10 10mm dia. generator,
at head-open slot, 115mm immerse length, H-370 stand, for solid/liquid
media, volumes 1- 250ml, 110V, 60Hz
85010301 SCILOGEX D160 Homogenizer Drive Motor, 110V/60Hz
85010401 SCILOGEX H-370 Homogenizer Stand
Accessories:
18900113 DS-160/5 5mm dia. generator, at head-open slot, 50mm immerse length for D-160,
for solid/liquid media, volumes 0.1-50ml
18900114 DS-160/10 10mm dia. generator, at head-open slot, 115mm immerse length for D-160,
for solid/liquid media, volumes 1- 250ml
Scilogex D160 Homogenizers
1275 Cromwell Ave.,
Suite C6
Rocky Hill, CT 06067
Tel: [phone]
Fax: [phone]
[e-mail]
www.SCILOGEX.com