Owner's manual

Hybex® Microsample Incubator — USER MANUAL
Version 1.2H, October 2014 11 [phone], [e-mail]
V. TROUBLESHOOTING
Symptom Cause Solution
Instrument does not turn on. Blown fuse(s)
Replace fuse(s) on back of unit,
beneath power cord receptacle.
Controller is not responding
when buttons are pressed.
Controller is faulty.
Contact SciGene or your distributor
to replace the controller.
VI. SPECIFICATIONS
Electrical
Cat. #1057-30-0 115V AC; 50/60 Hz; 3A
Cat. #1057-30-2 230V AC; 50/60 Hz; 1.6A
Dimensions
Outside (H x W x D) 10 x 6 x 12 inches (21 x 15 x 30 cm) — cover closed
Weight
Instrument (without block) 6 lbs (3 kg)
Performance and Controls
Temperature Range Ambient +5°C to 99°C
Temperature Regulation ± 0.2°C
Temperature Controller Digital PID
Digital Thermometer Output T-type Thermocouple
VII. ORDERING INFORMATION
Cat. # Description UoM
1057-30-0 Hybex Microsample Incubator, heating base, 115V. EA
1057-30-2 Hybex Microsample Incubator, heating base, 230V. EA
1057-31-0 0.2 ml tube block. Holds 96x0.2ml PCR tubes or single plate EA
1057-33-0 0.6 ml tube block. Holds 60x0.6ml tubes EA
1057-34-0 1.5 ml tube block. Holds 32x1.5ml microcentrifuge tubes EA
1057-39-0 Flat-bottom heat block. Holds a microplate. EA
1057-35-0 Waterbath Insert for Hybex Incubator EA
1057-38-0
Hybex Microarray Chamber Kit. Includes two chambers, four slide
racks, two handles and assembly tools.
EA
1051-52-0 Digital thermometer. Includes cable and NIST certificate EA