Users’ Operations Manual SXT7000 SXT7000e2 SXT7000 & SXT7000e2 Elliptical Trainer Fit-Key™ Compatible Before using this product, read this manual and follow all safety rules and operating instructions.
TABLE OF CONTENTS SAFETY INFORMATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 SETUP & INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SAFETY INFORMATION The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and their explanations, deserve your careful attention and understanding. The safety warnings do not, by themselves, eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures. Look for these symbols to point out important safety precautions. It means attention ! Your safety is involved.
INTRODUCTION Thank you for your purchase of the SCIFIT SXT7000 or SXT7000e2 Elliptical Rotary Walker. We have incorporated the finest technology and ergonomic design into this machine to assist you in achieving your fitness goals. However, for your safety, please adhere to the following recommendations before you begin to exercise.
SPECIFICATIONS Weight . . . . . . . . . SXT7000 - 275 lbs. / 125 Kg. . . . . . . . . . . .SXT7000e2 - 336 lbs. / 152 Kg. Max User Weight . . 350 lbs. / 159 Kg. Power . . . . . . . . . . Self generating w/auto recharge battery back-up. Optional Low Voltage AC adapter available. Resistance System . Electromagnetic Self Generating Bi-directional Resistance Work Load. . . . . . .
SETUP & INSTALLATION Placement of Cardiovascular Machine Position the unit in a location that has a stable and level sub-floor. Equipment should be positioned in a location that is not in direct sunlight, in areas of extreme temperature and humidity, or where the equipment may be splashed with water or fluids. This machine is intended for indoor use only. Equipment should be positioned with a safety perimeter of 40” or 1 meter around unit.
ASSEMBLY Assembly Some equipment shipped overseas assembly is required (SXT7000e2 only). Follow the steps below for assembly. Mount Left & Right Handrails (A) Remove the two 3/8-16 x 3/4 Socket Button Head Screws from the Pivot Housing. Required Tools: 7/32” Allen Wrench Required Parts: Qty. Description 1 Left Handrail 1 Right Handrail 1 Easy Access Step Item 1 2 3 Part # A3221 A3222 A3223 (A) Remove 3/8-16 Screws Position Access Step Place Easy Access Step over the front cross tube and telerails.
PRODUCT OVERVIEW Fit-Key™ Receptacle Heart Rate Contact Grips Adjustable Display & Control Console Water Bottle Holder Ergonomically Positioned Handrails (SXT7000e2 Only) BioFlex™ Articulating Footbed Pivots Leveling Base Endcaps Molded Assist Step (SXT7000e2 Only) 6 SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT
KEYPAD FUNCTIONS Work Level Status Screen - The Work Level Status Screen gives a progressive real-time indication of current work level of any and all programs. TIME - The Time readout displays the user input of work level desired in a program, also the amount of workout time desired. During the running of a program it displays the amount of minutes that are left in the workout program. SELECT - The Select key locks the display functions at their current settings.
BIOMECHANICAL POSITIONING Body Positioning Comfort is a key issue to obtain the most beneficial exercise. The feet should be centered above the pivot points of the footbed. This will reduce foot stress, ankle strain and promote better circulation. SCIFIT’s patented Bio-Flex is designed to accommodate the user’s natural gait and allow the user to target specific muscle groups.
ACCESSORIES 12V Power Pack To provide continuous power to the display when equipment is not in operation, plug in the 12V power pack into the jack located on the lower back side of center console.
HEART RATE TRANSMITTER STRAP & CONTACT GRIPS Uses of the Heart Rate Transmitter Strap The optional wireless heart rate transmitter accessory is a useful device if you desire continuous feedback on your current heart rate during a workout. In addition, the SXT7000 & SXT7000e2 include a Heart Rate Control program which requires use of the strap. Use of the Heart Rate Contact Grips For those models with contact heart rate grips, simply grip the contact pads lightly.
PROGRAM INSTRUCTIONS Programs SCIFIT products have 200 levels of computer controlled resistance, which ensures that users of all fitness levels will be able to get a challenging but not overwhelming workout. Because the resistance is adjustable in .1 increments, it is easy for the user to track progress. SCIFIT products feature one of the highest resistance capabilities available on any cardio equipment. Heart Rate Program The Heart Rate Transmitter Strap is required for this program.
PROGRAM INSTRUCTIONS Constant Work Constant Work is a unique program that allows a user to set a target wattage output (or workload). The computer will control the resistance so that the user is always working at that target level, regardless of speed. Resistance is lower at higher speeds and higher at lower speeds. • Start Moving Crank Arms • Press Constant Work program key.
MAINTENANCE & SERVICE Maintenance The SXT7000 & SXT7000e2 are virtually maintenance free. After training, always wipe down your SCIFIT exercise product. Perspiration that continuously settles on the frame, upholstery, casings, and control console may eventually cause rust or damage. Damage resulting from lack of maintenance is NOT covered under warranty. Clean the console, seat, hand grips and body with a commercially manufactured wipe designed for the fitness industry, or a damp cloth.
WARRANTY SCIFIT Statement of Warranty SCIFIT warranties new products against defective workmanship and/or materials under normal and proper use subject to the following limitations: (a) SCIFIT’s obligation to the original purchaser shall apply to: Within the United States and Canada both parts and the cost of labor required to replace or repair a defective product for a period of one (1) year from user purchase date as documented by warranty card and if warranty card has not been returned by user then date
Record Your Model Number:______________ Record Your Serial Number:______________ Record Your Date of Purchase:______________ 5151 South 110th East Avenue Tulsa, Oklahoma 74146 USA Sales: 1-800-278-3933 • 1-918-359-2000 Customer Service: 1-800-745-1373 www.scifit.com art 15 of the FCC Rules. llowing two conditions: (1) ful interference, and (2) this ference received, including undesired operation. complies with Canadian asse (Å) est conforme á la EN50081-1:1992 EN60335-2-82:2000 Part No. P3868 Rev.
