Operating instructions

ACCESSORIES
SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT
13
12V Power Pack (Standard)
To provide continuous power to the display when
equipment is not in operation, plug in the 12V power
pack into the jack located on the lower back side of
monocoque frame.
High Support Boots (Optional)
A plastic calf high boot which is open at the front and
has Velcro straps to keep the legs in place. They come
with the crank bars for easy installation and removal.
Low Support Boot (Optional)
Footplate with a lip at the back to keep the feet from
sliding off the pedal. Open at the front and has Vel-
cro straps to keep the feet in place. They come with
the crank bars for easy installation and removal.
Wheelchair Platform and Tie Downs (Optional)
The wheelchair platforms are flat steel sheets that fit
into the inside channels of the seat system and can be
installed in the field. The platforms do not change the
seat removal.
The tie downs are adjustable straps with clips on
each end. They fix to the wheelchair and the PRO1,
PRO1000 or PRO2 at the front cross tube. The footrest
must be removed to expose the tie down anchors.