Install guide

27
G. Club Mode (Thru Version 1.2 Software)
The Club Mode enables club owners and managers to customize certain features
of the DC1000 treadmill. Press the ELEVATION UP and ELEVATION DOWN
arrows simultaneously for three (3) seconds to enter this mode. (Press the keys
until “UnIt” is shown in the top display)
1. Unit of Measure
This setting determines whether English or metric units of measure will be
displayed. The top display will show “UnIt”. The speed display will show “brl” or
Sl”. “brl” represents British or English units (miles) and “SI” represents metric
units (kilometers). Select the unit of measure by using the SPEED UP, SPEED
DOWN, ELEVATION UP, or ELEVATION DOWN keys. After selecting the
desired unit of measure, press the SELECT key to advance to the next setting.
2. Duration.
This setting allows the owner/manager to select the maximum workout time,
which will be available to the user. The speed display will show “dUr”. The
range is from 0 to 90 minutes in increments of 5 minutes. “0” is unlimited time
and is the default setting. The top display shows the time selected. Select the
duration by using the ELEVATION UP or ELEVATION DOWN keys. After
selecting the desired duration, press the SELECT key to advance to the next
setting.
3. External Communication
This setting selects either the C-Safe (CSF) or Cardio-Key (CAr) communications
protocol. The top display will show “S.CO”. The speed display will show either
“CAr” or “CSF”. Use the SPEED UP or DOWN keys to toggle between the two
(2) settings. If neither C-Safe nor Cardio-Key is used, either setting will work.
After selecting the desired communication protocol, press the SELECT key to
advance to the next setting.
4. User Speed
This setting allows the owner/manager to select the maximum speed, which will
be available to the user. The top display will show “U.SPd”. The range will
depend on the factory settings the defaults of which are 0.3 to 10.0 MPH (1 to 16
KPH). The speed display shows the value selected. The default setting is 10.0
MPH (16.0 KPH). Select the maximum user speed by using the SPEED UP or
SPEED DOWN arrows. After selecting the desired speed, press the SELECT
key to advance to the next setting.
5. Distance
This function displays the distance since the deck was last flipped. The top
display will show “FLIP”. The speed and elevation displays combine to show the
distance with the speed display showing thousands of miles (or kilometers) and