Specifications

23
XAVG[CR] None
Accumulates the current weight in the
XBAR registers.
RESET_XAVG[CR] None Clears the XBAR registers.
GLP[CR] Sends GLP header Puts balance in the GLP mode.
XAVG[CR] Sends weight while in GLP
Accumulates the current weight in the
XBAR registers.
RCL_XAVG[CR] Sends statistics and signature line Terminates GLP mode.
ISO[CR]
Sends ISO header and waits for target
weight entry
Puts balance in ISO mode.
xxx.xx_Targ[CR] Sends target weight (g) Enter target weight value in grams.
SEND[CR] Sends weight, difference between weight
and target, and signature line
Terminates ISO mode.
ACAL[CR] None
Starts the automatic internal calibration
weight calibration routine.
TYPE 2 COMMANDS (balance input functions)
COMMAND RESPONSE PURPOSE
[register number]_STORE[CR] None Stores the current weight, at the greatest
possible resolution, in the specified
register.
[Decimal number]_ENTER_[register
number]_STORE[CR]
None
Stores the number entered, in the
current units, as an additive constant in
the register specified.
[decimal
number]_ENTER_CONVERT_[register
number]_STORE[CR]
None
Stores the number entered, as a "last
front panel units" relative multiplier, in
the specified register.
[decimal number]_TARE[CR] None
Adds the number entered, in current
units, to the TARE register. CLEAR
[CR] zeroes the TARE register.
TYPE 3 COMMANDS (balance output functions)
COMMAND RESPONSE PURPOSE
SEND[CR] See the RS-232 Balance Message
Formats section..
Returns the contents of the display
register.
[register number]_RCL[CR] REG XXX:[register contents][current
units or 'MULT.'] [CR] [LF]
Sends the contents of the specified
register in the current units if it is
additive or with the designator 'MULT.'
if it is multiplicative. An unflagged
number is sent with no designator. An
undefined register returns a ? with a
[CR][LF].
RCL_TARE[CR] REG 091:[TARE register contents]
[current units][CR][LR]
Return the TARE register's contents.
RCL_[(CONVERT)(CAL)] REG XXX:[contents of specified
register][MULT.][CR][LF]
Returns indicated register contents, if in
that mode. If not in that mode then a ?
with a [CR][LF] is returned.
RCL_PCS[CR] REG XXX:[contents of pieces
register][last FP units/pc][CR][LF]
Returns pieces register contents
expressed as last front panel units/pc, if
in that mode. If not in that mode then a
? with a [CR][LF] is returned.