User's Manual

PT-3S
Introduction
PT-3S is a water-proof medical button, it activates medical alarm remotely when
you press the button.
Installation
Select “Installer Mode” on the Base Unit, and enter Installer Password to gain
access authority. Then select \Set Device\Enroll Device\Medical Button\Enter
Zone No. to enroll the ID of PT-3S by pressing its button
Specifications:
Battery: 3V
Current: 1uA @ standby
15mA @ operation.
Battery life: about 3 years.
Water proof test condition: 50 cm deep in 25℃ water, 5 hours.