User's Manual

APPENDIX
A-1. In-coming Message Display.
A user or a CMS can send messages to the LS-30 if the Base Unit has been connected to the Internet
through the Ethernet Adaptor (optional) by using the HyperSecureLink program.
The LCD display will show “Messages Come In” and issue a warning sound periodically to remind
the user if any new message has been received by the LS-30 Base Unit. The user can check the
message by pressing (Hot Key) 5 after the password has been entered in Disarm Mode.
Up to ten 30-character messages with time tag can be stored in the memory of the Base Unit. Stop the
warning sound by pressing (Hot Key) C after entering the password.
(Note: ! and & are not allowed in the message)
A-2. Connection Diagram for USB or RS-232 Computer Interface
COM1 cable USB or RS-232 Adaptor HyperSecureLink Software
(Note: For the USB Adaptor driver, please refer to the USB-3 Installation Guide in the CD ROM.)
A-3. Connection Diagram for the Ethernet Adaptor or the Data Communication Module
COM1 Cable
A-4. Connection Diagram for the X-10 Power Line Interface
X-10 Appliance Module X-10 power Line Interface Controller X-10 or COM2 Cable
.
Internet
Or PSTN
ToCOM1
Power Line
To LS-30
COM2
HyperSecureLink or
CMS polling software
To PC
USB or COM Port
To LS-30
COM1
3
5
Data communication Module
connects to Telephone network
Ethernet Adap
tor connect to Internet
Router
Ethernet
/wifi/GPRS
Adaptor or
Data Communication Module