User's Manual

(4-2-1) Set Telephone Number Common 1 Number

Common 2 Number

Common 3 Number

Common 4 Number

Panic Number Answer By Voice

Burglar Number Answer By Tone

Fire Number

Medical Number

Special Number

Latchkey/(power) Number

Pager Number

Pager Data

As many as 10 telephone numbers and one pager number can be set in the auto-dialer, each up to 23 digits.

4 common numbers and pager number:

These will be dialed in all types of alarm. They can be the numbers of your office, friends, neighbors

or family members.

5 specific numbers each for different alarms:

These will be dialed only when the LS-30 is triggered by the specified alarm. For example, the fire

number will be dialed only in a fire alarm.

Latchkey number /Power status report number:

This number will be dialed, disregard the Cease Dialing Mode Setting (refer to (4-2) Set Telephone-

Set Cease Dialing Mode), if following things happen:

1). When a Latchkey Remote Controller (Refer to (4-4-1) Change Device Setting- Enable State-

Latchkey) or a user with the Latchkey password (User 9 or User 10 password) leave the house

(change from Disarm/ Home Mode to Away Mode) or enter into the house (change from Away

Mode to Disarm/ Home Mode).

This function is useful to parents who want to make sure their children have returned home safely.

Usually, the Latchkey number will be the parents’ mobile phone number.

Note: This function is not applicable for Partial Zone 91-99.