User's Manual

(4-2) Set Telephone Set Telephone Number (4-2-1)
Set Dial Mode Tone
Pulse 33/66
Pulse 40/60
Set Auto Answer Auto Answer On Set Ring Count
Auto Answer Off
Set Telephone Line Cut Detection Permanent Off
Away Mode On
Permanent On
Set Cease Dialing Mode 30 Minutes Due
CMS Report OK
Set Tel. Ringer Tel. Ringer On/ Off
Set Dial Tone Check Dial Tone Check Enable/ Disable
Dial Mode: Tone /Pulse 33/66 /Pulse 40/60 (default, Tone)
Check your telephone system and select the proper Tone or Pulse mode for the auto-dialer.
Auto Answer Ring Count: Auto Answer ON with Ring Count 1-30 /Auto Answer OFF
(default, Auto Answer OFF)
Auto-Answer ON: The Base Unit will answer the incoming call automatically after the ring count
number set in this command has been reached. (You have to switch on this function, if you want
to use dial-in control. Three or more ring counts are recommended to avoid triggering by
noise.)
Auto Answer OFF: The Base Unit will not answer the incoming call.
22