User's Manual

(2) System Check Event Check Check By Sequence
Check By Date
Telephone Number Check (2-1)
Voice Check (2-2)
Device Check (2-3)
Event Check: The Base Unit can store 512 event records in its memory. These events can be checked by
time sequence or by entering the date information. Use the ↑ and ↓ keys to scroll up and down
the events.
.
Reading Event Log from the LCD Display
Ex.1: LCD shows C02-03 Disarm
04/26 22:08 01
The Controller (C) numbered 02-03 set the system in Disarm state at 04/26 22:08;
this is the latest event (Event # 01).
Ex.2: LCD shows B01-02 Burglar
01/13 19:32 253
The Burglar sensor (B) numbered 01-02 issued a burglar alarm at 01/13 19:32,
this event is numbered as 253.
Ex.3: LCD shows Z00-11 Disarm
12/22 08:00 03
The Master (user number 1) enters the Base Unit (Z) into Disarm state at 12/22 08:00 from
Keyboard, this event is numbered as 03.
Note: All the events generated by the Base Unit are marked with Zgg-uu.
gg = 00 (Event of Base Unit itself), gg = 91-99 (Event of partial zones.)
uu = 0x (Event of Base Unit itself),
x=0 (Base Unit), x=1 (Aux1 I/P), x=2 (AUX2 I/P), x=3 (Sensor In),
x=5 (Emergency Button), x=6 (Inactivity)
uu = 1y (Command from keyboard, y = User number.)
uu = 2y (Command from Remote, like Dial-in control, USB/RS-232 or Internet.)
y=1 (master), y=2-8 (user 2-8), y=9,0 (latchkey users), y=b (Duress),
y=c (Installer), y=d (CMS1), y=e (CMS2), y=f (User can’t be specified)
10