User's Manual

(4-4-1) Change Device Setting Controller Change
Burglar Sensor Change Enter Zone Number
Fire Sensor Change Enable State
Medical Button Change Zone Number
Special Sensor Change Switch Control
Enable state of devices:
Device On Duty/Bypass (default On Duty): (For all devices)
Device On Duty: This sensor is working in the system currently.
Device Bypass: Bypass this sensor; the system will ignore the alarm signal received from this
sensor.
Delay ON/OFF (default Delay=OFF): (For Controller & Burglar sensor)
Delay ON: (Refer to (4-1) Set Timer - Exit Delay/Entry Delay.)
For the Remote Controller, the Exit Delay will be imposed on the Away command
from this controller.
For the Burglar sensor, the Entry Delay will be imposed on the Burglar alarm
signal from this sensor.
Delay OFF: The trigger signal or command from this sensor or controller will be processed
immediately, regardless of the Exit/Entry Delay setting in (4-1).
24-Hour Zone YES/NO (default 24-Hour Zone= NO): (For Burglar sensor)
24-Hour Zone/YES: This Burglar sensors alarm signal will be processed all the
time regardless of the system’s operation mode, ie either in Arm or Disarm.
24-Hour Zone/NO: This sensor’s alarm signal will only be processed in Arm Mode.
Home Mode Active/Inactive (PIR default Inactive, Magnet default Active): (For Burglar sensor)
Home Mode Active: This Burglar sensor will trigger an alarm in Home Mode operation.
Home Mode Inactive: This Burglar sensor will not trigger an alarm in Home Mode operation,
it will only trigger an alarm in Away Mode operation.
Voice Warn ON/OFF (default Voice Warn ON): (For Fire sensor & Medical Button)
Voice Warn ON: If this sensor sends an alarm signal, there will be a 30-second voice warning
from the Base Unit before the alarm reaction procedure starts.
Voice Warn OFF: There is no voice warning. The Base Unit responds immediately when there
is an alarm issued by this device.
Siren/Relay ON/OFF (default Siren/Relay ON, only OFF for Controller): (For all devices)
Siren/Relay ON: The Relay will act and sirens (both Inner Siren and Remote Siren) will go
off when there is an alarm issued by this sensor after the Delay time or Voice
Warning passes.
29