User's Manual

(4-2-1) Set Telephone Number Common 1 Number
Common 2 Number
Common 3 Number
Common 4 Number
Panic Number Answer By Voice
Burglar Number Answer By Tone
Fire Number
Medical Number
Special Number
Latchkey Number
Pager Number
Pager Data
As many as 10 telephone numbers and one pager number can be set in the auto-dialer, each up to 23 digits.
4 common numbers and pager number:
These will be dialed in all types of alarm. They can be the numbers of your office, friends,
neighbors or family members.
5 specific numbers each for different alarms:
These will be dialed only when the LS-30 is triggered by the specified alarm. For example, the fire
number will be dialed only in a fire alarm.
Latchkey number (Power status report number):
This number has two purposes:
1). When a Latchkey Remote Controller (Refer to (4-4-1) Change Device Setting- Enable
State- Latchkey) or a user with the Latchkey password (User 9 and User 10 password)
disarms the system or set the system in AWAY mode.
This function is useful to parents who want to make sure their children have returned home
safely. Usually, the Latchkey number will be the parents’ mobile phone number.
2). When the Base Unit detects AC power break or restore, this number will be dialed after a
random delay of 30-120 seconds. The pre-recorded message (power loss/power restore)
will be played when the call is successfully connected.
24