User's Manual

1.5 Device Numbering Plan
All the sensors of LS-10 are divided into five main categories.
1, Controller /Panic Devices (C) x 32: Remote Controller, Keypad.
2, Burglary Sensors/Sirens (B) x128: Door Magnet, PIR, Glass Break Detector, Vibration Sensor,
Pressure Change Detector, Wireless Siren.
3, Fire Sensors (F) x64: Smoke/Heat Detector, CO Detector, Gas Detector, Fire Call Point.
4, Medical Help Transmitters (M) x32: Medical Button, Inactivity Detector.
5, Environment Sensors (S) x32: Temperature/Humidity/CO2 Sensor, Flood/Light Detector,
Analog/AC Meter.
All the sensors are numbered with two double-digit device numbers from (01-01) to (99-99), the first
two-digit is the Group number and the second two-digit is the Unit number. These numbers will be
given by the Base Unit automatically in the device enroll process and can be modified by
HyperSecureLink software, some cloud server also allows user to assign a name to the device.
Ex.1, C 01-02: Controller number 01-02 (Group number 01, Unit number 02).
Ex.2, B 02-04: Burglar Sensor number 02-04 (Group number 02, Unit number 04).
Group number: The user can group several sensors by using the same Group Number. For
example, the sensors in the first floor can be assigned as group number “01” and the sensors in
the second floor can be assigned as group number “02”.
Note: Special group numbers
”00” for Base Unit (Z), “80” to “89” for Xkeypad (C).
“90” for status indicator (only for Special Environmental Sensor).
“91” to “99” for the Partial Arm Zones (Z) (please refer to APPENDIX B.1).
All the events generated by the Base Unit itself are marked with Zgg-uu.
gg = 00 (Event of Base Unit itself), gg = 91-99 (Event of partial zones.)
uu = 0x (Event of Base Unit itself),
x=0 (Base Unit), x=3 (External Sensor In), x=6 (Inactivity)
uu = 2f (Command from USB or Internet.)
uu = 34 (CMS communication failed)