User's Manual

* If any of the settings has been changed then double click the Update to update the settings.
Then Click the Reset to save the settings.
Use VCOM software to locate the new IP address and enter the LS-10 setup web page again.
* Select TCP Mode and change the settings according to the information from the web server or CMS
service provider.
Telnet Server/Client: Select Client.
Port Number: Please check with your web server or CMS service provider for this information.
Remote server IP Address: Please check with your web server or CMS service provider for this
information, either IP address or domain name.
Client mode inactive timeout: 20 minutes (default).
Server mode protect timeout: 60 minutes (default).
* Double click the Update to update the settings.
Then Click the Reset to save the settings.