User's Manual

Nickname: Name or location of the system.
IP Address: As the setting of the Virtual Server in the Ethernet Router.
Subnet mask: 255.255.255.0
Gateway: Please enter the gateway address of your Ethernet Router.
DNS: Please get this address information from your ISP.
IP Configure: To operate as a server, Static must be selected
Password Setting: Enter new User Name and Password.
Note: If you change the User Name and Password, please make sure that you write them
down on a paper otherwise if you forget the new User Name and Password then this
adaptor will not be accessed any more.
* If any of the settings has been changed then double click the Update to update the settings.
Then Click the Reset to save the settings.