User's Manual

C.1.2, Configure the Ethernet Router.
The following example is for Fixed IP address application. But if you have no Fixed IP address
then you can apply some free DDNS service from the internet.
For example D-Link provides free DDNS service for their routers.
http://support.dlink.com/emulators/wbr2310/tools_ddns.htm
Enter the web page of your Ethernet Router and find the setting of Virtual Server.
Select a proper internal IP address and corresponding port number for the TCP/IP communication
protocol of the LS-10.
Ex: The internal IP address of 192.168.2.90 and port number 1690 is assigned as the Virtual Server
address of the LS-10.
(This IP address and port number will be used to communicate with the LifeSOS system by
HyperSecureLink program or mobile Apps.)
C.1.3, Configure the LS-10
* RUN the VCOM program on your PC.
Click the Search