User's Manual

Appendix A: I/O Terminals
A.1 External Wire Sensor Input:
The External Wire Sensor should have NO/NC contact and connects to Input and Ground
terminals.
It can be assigned as a Controller, Panic, Burglar, Fire, Medical or Tamper device.
The Zone number of this input is fixed as “00-03”.
Setting of Wire Sensor Type and its parameters from HyperSecureLink software.
A.2 External Alarm Siren Output:
The alarm siren should be connected to the Siren (+) and Siren (-) terminals, the max. current sinks
should not over 200mA.
Setting the Alarm Siren Action Time
Alarm Siren Action Time (Default, 60 Seconds.): The time that siren sounds when alarm happens.
Setting of Alarm Siren Action Time from HyperSecureLink software.