User's Manual

SPECIFICATIONS
Input Power: 7V DC or Micro USB input.
Standby Current: About 280mA
RF : (Follows local regulations, other frequencies as requested)
Receiving Frequency: 915MHz (For FCC), 868MHz (For CE)
Transmission Frequency: 433MHz
Data Modulation: OOK (On Off Key).
Power: less than 10mW.
Range: about 100m to 300m or more @open field, 25℃ (Depends on sensors and Hardware version).
Receiver Type: super heterodyne.
RF Security Code: 16,777,216 combinations with check sum for each type of sensors.
More than 4 billion combinations in total.
Communication Link: Ethernet interface, wifi (Option)
Event Log: max. 512 records.
Display: 4 LEDs (Away/Home/Disarm/Data).
Sensor Zones: total 288 zones. (Burglar zones x 128, Fire zones x 64, Controller zones x 32,
Medical zones x 32, Special sensor zones x 32)
Memory Back-up: CR 2032 Li battery, back-up time minimum 1 year for a new battery without power.
Back Up Battery Connector: 5V USB power pack.
Delay Activation Time: 0- 255 seconds programmable.
Digital Interfaces : micro USB socket.
Internet Interface: RJ45, wifi (Option).
Automation Switch control: RJ11 6-pin
Control of 16 units X-10 switches or (XRM-01) Relay Modules. I2C Adaptor (optional)
Internal beeper for Alarm, warning and status reminding.
Internet CMS protocol: Proprietary Scientech Protocol (ST-I, ST-II), CSV and SIA ADM-CID (2007) IP
Alarm protocol.
Wire Sensor Input: Can be assigned as Panic, Burglar, Fire, Medical, Tamper or Controller.
Alarm Out: Open collector transistor output with 5.1Ωin series (max 200mA). For 5V external siren or
other alarm device.
Clock Accuracy: within 5 seconds daily. (non for LS-10N )
Operation Temp.: -10℃~40℃.
Storage Temp.: -20℃~55℃.
Humidity: 10-95%RH.
Size: 118x78x32 mm.(Main body)
Weight: about 108 g. (Main body)
(The manufacturer reserves the right to change the specifications without prior notice)