User's Manual

5.3 DISARM/ MONITOR Mode: The LS-10 will not issue any alarm for Burglar sensors, but
24-Hour sensors, Fire sensors, Panic, Medical Buttons and Environment sensors still work all the time.
Enter into “DISARM” or “MONITOR” Mode from different devices or services.
Monitor Mode: In this mode all the trigger signals from the Burglar Sensors (not including the
sensors assigned in Group number 91-99 Partial Arm Zones) will be recorded in the
Event Log as trigger signals only; no alarm will be issued. The purpose of this mode is
for the recording of all activities in the protected area while in Disarm Mode.
5.4 Automatically Operation scheduling set by HyperSecureLink software.
Note: This function is not available for LS-10N.
Ex: Main Zone (Group Number 01~ 89) will be “Disarmed” at 07:30 and enter into “Away” mode
at 19:30 everyday.