Setup guide

2.14. Validation Offset

View the offset of the thermocouple

>Validation Offset

Screen Representation

## Offset Value

Keypad

Rubber and Plastics Return to main menu

Stop Exit to normal mode of operation

2.15. Voltage Calibration

Adjust voltage offsets

Voltage Calibration

V = VVV VCal. = CCC

Screen Representation

VVV Voltage measured by unit

CCC Voltage calibration offset. This should be adjusted so that

the VVV value is the same as the line voltage measured by

a voltmeter.

Keypad

Unwrapped Increase current field

Wrapped Decrease current field

Rubber and Plastics Select and return to main menu

Stop Exit, without saving, to normal mode of operation

2.16. Voltage setup

Select input voltage of unit

>Voltage setup

115V

230V

Keypad

Unwrapped Select next option. Second line shows the new value

Wrapped Select previous option. Second line shows the new value

Rubber and Plastics Select and return to main menu

Stop Exit, without saving, to normal mode of operation