Setup guide

20
1.8 Serial Port Bit Rate
Choose bit rate for device connected to the serial port
>Serial Port Bitrate
9600
19200
57600
115200
300
1200
2400
4800
If USB FLASH/MSD is selected as the RS232 device, a Serial Port Bit Rate selection
of 9600 will be required for the Data Logger to be operational.
Keypad
Unwrapped Select next option. Second line shows the new value
Wrapped Select previous option. Second line shows the new value
Rubber and Plastics Select and return to main menu
Stop Exit, without saving, to normal mode of operation
1.9 Printer user ° char
Setting to print a ° sign
Printer user ° char
dd [0xhh]
Screen Representation
dd Decimal value for selected char (default 32)
hh Hex value for the selected char (default 20)
Keypad
Unwrapped Increase value by one
Wrapped Increase value by ten
Rubber and Plastics Select and return to main menu
Stop Exit, without saving, to normal mode of operation
1.10 Save and Exit
Save settings and return to normal mode
Upon selection, current settings are saved and unit restarts in normal mode of
operation
1.11 Exit
Exit menu without saving settings.
Upon selection, current settings are discarded (not
saved) and unit restarts in normal
mode of operation.