Setup guide

19
1.7 End of Line CR/LF
Configure the printout layout
>End Of Line CR/LF
CR/LF
-
CR
This only needs to be set if a serial printer is attached to the serial port.
Available options
- No line terminator is sent after each line. To be used with
printers that accept only 20 characters per line and
automatically advance to next line. Should be used with
the STATprinter.
CR A <CR> is sent at the end of the line. To be used with
printers that advance to beginning of next line when a CR
is received.
CR/LF A <CR><LF> is sent at the end of the line. To be used with
printers that translate advance to beginning of next line
only when LF is received.
Keypad
Unwrapped Select next option. Second line shows the new value
Wrapped Select previous option. Second line shows the new value
Rubber and Plastics Select and return to main menu
Stop Exit, without saving, to normal mode of operation
SciCan Suggested
External Printers
End Of Line CR/LF Serial Port
Bit Rate
Printer user °
char
Epson
TM-U220D
(C31C515603)
CR/LF 9600 248 [0xF8]
Citizen
IDP-3110-40 RF 120B
CR 9600 N/A
Star Micro
SP212FD42-120
CR 9600 210 [0xd2]
Star Micro
SP216FD41-120
CR/LF 9600 210 [0xd2]
Star Micro
SP512MD42-R
CR/LF 9600 210 [0xd2]