Fresh Air, Surface and Fabric Regenerator Air-Surface Sanitizer OWNERS MANUAL MORE THAN JUST AIR PURIFIERS...
CONTENTS EdenPURE G-7 & PURATRON B-7 (WHOLE HOUSE MODELS) SPECIFICATIONS.......................................................................................1 SAFETY WARNINGS..................................................................................2 FEATURES..................................................................................................3 INSPECTION & INSTALLATION.................................................................3 GENERAL OPERATION...................................
EdenPURE™ G-7 Puratron™ B-7 READ AND SAVE THESE INSTRUCTIONS VERY IMPORTANT: • Read this manual carefully before operating. • Do not operate unit if unfamiliar with this manual. • Keep this manual for future reference. SAFETY WARNINGS TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY, BASIC PRECAUTIONS SHOULD BE FOLLOWED INCLUDING: • Disconnect power cord before performing any maintenance or service.
FEATURES · QUIET FIVE SPEED FAN · ADJUSTABLE 24 HOUR CLOCK · ADJUSTABLE POWER OFF TIMER · ADJUSTABLE PURIFIER CONTROL (USED FOR RAPID ODOR REMOVAL AND SURFACE STERILIZATION) · ANION - NEGATIVE ION GENERATOR (NEGATIVE IONS CAUSE THE FLOATING · · · · · · · · · · · · · PARTICULATES TO MAGNETIZE TOGETHER FORMING A MASS WHICH DROPS THEM TO THE FLOOR TO BE SWEPT UP) STERILIZE (UVC LIGHT HELPS REDUCE AIRBORNE GERMS AS THEY PASS THROUGH THE UNIT) HELPS REDUCE SMOKE AND ODORS FROM YOUR HOME, OFFICE, CAR, BOAT, RV,
GENERAL OPERATION The unit can be operated using either the wireless remote or the front control panel. OFF 1. On the rear of the purifier, switch the master power to the on position (the front display will light up). ON 2. Press the ON/OFF button on the front of purifier to power on the unit. The fan will start. 3. Press the Fan▲ and Fan▼ buttons to adjust the airflow speed to your desired level. 4.
GENERAL MAINTENANCE UNPLUG THE UNIT BEFORE PERFORMING ANY MAINTENANCE PROCEDURES Recommended Monthly Maintenance • Clean the Primary Filter • Clean the Purifier Plate • Clean the Catalytic Screen PRIMARY FILTER & CATALYTIC SCREEN CLEANING You have three options to clean the Primary filter and the Catalytic Screen: 1. When visibly dirty or after 30 days, remove the primary filter and the catalytic screen from the unit. With a hand-held vacuum, remove the heavy particulate from both filters.
6
GENERAL MAINTENANCE CONTINUED UNPLUG THE UNIT BEFORE PERFORMING ANY MAINTENANCE PROCEDURES CHANGING THE UV LAMP 1. Unplug the power to the unit. 2. Remove the Primary filter and the Purification Plate. Refer to page 5. 3. Remove the tape on either end of the UV Lamp if it is present. 4. Place one finger from each hand (middle or index) on the metal ends of the UV Lamp. Very carefully apply just enough pressure to roll the lamp (preferably towards the back of the unit) until it is loose.
GENERAL MAINTENANCE CONTINUED UNPLUG THE UNIT BEFORE PERFORMING ANY MAINTENANCE PROCEDURES CHANGING THE FUSE 1. Unplug the power to the unit. 2. Remove the fuse holder by using your fingernail or a flat blade screwdriver. 3. Remove the blown fuse and use it to push out the spare fuse. 4. Place the new fuse into place and re-insert fuse holder. 5. Plug the power cord back into the unit and turn the master power on.
TROUBLESHOOTING 1. I have plugged in the unit, turned “ON” the main power switch (on the back of unit), pressed the ON/OFF button on the remote (or the front panel) and nothing happens. What’s wrong? • Make sure the power cord is inserted completely into the receptacle on the back of the unit. • Make sure the electrical outlet is capable of providing power to the unit.
EdenPURE™ Area Model READ AND SAVE THESE INSTRUCTIONS VERY IMPORTANT: • Read this manual carefully before operating. • Do not operate unit if unfamiliar with this manual. • Keep this manual for future reference. SAFETY WARNINGS TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY, BASIC PRECAUTIONS SHOULD BE FOLLOWED INCLUDING: • Disconnect power cord before performing any maintenance or service. • The rear of the unit should always have at least one inch of open area to allow unrestricted airflow.
FEATURES · QUIET THREE SPEED FAN · AUTO MODE CYCLES OZONE OR ANION (ION GENERATOR) ON AND OFF AUTOMATICALLY · MANUAL MODE AUTOMATICALLY DEFAULTS TO ANION FEATURE AFTER 2 HOURS · 2 OR 4 HOUR TIMER MODE OPERATES UNIT FOR 2 OR 4 HOURS AND THEN SHUTS OFF AUTOMATICALLY · OZONE GENERATOR (USED FOR RAPID ODOR REMOVAL AND SURFACE STERILIZATION) · ANION - NEGATIVE ION GENERATOR (NEGATIVE IONS CAUSE THE FLOATING · · · · · · · · · · PARTICULATES TO MAGNETIZE TOGETHER FORMING A MASS WHICH DROPS THEM TO THE FLOOR TO B
ADVANCED FUNCTIONS Ozone Function (use is optional) Used for rapid odor removal and surface sterilization. Select this feature by pressing the “FUNCTION” button until you see “OZONE” on the digital display. Anion Function This unit includes a negative ion generator. Negative ions literally sweep your breathing space clean of many lung damaging pollutants by causing the floating particulates to magnetize (attract) together forming a mass which drops them to the floor to be swept up.
GENERAL OPERATION The unit can be operated using either the wireless remote or the front control panel. 1. Press the POWER button. This starts the unit and turns on the LED display. The soft blue backlight will turn off after approximately 20 seconds. 2. Press the MODE button successively to select your desired mode; MANUAL, AUTO, 2 HOURS, 4 HOURS (see Advanced Features). Note: Ozone setting will operate for 2 hours and then revert to ANION. 3.
GENERAL MAINTENANCE UNPLUG THE UNIT BEFORE PERFORMING ANY MAINTENANCE PROCEDURES Recommended Monthly Maintenance • Clean the Pre-Filter • Clean the HEPA Filter CLEANING THE PRE-FILTER & THE HEPA FILTER When visibly dirty or after 30 days: 1. Unplug the power to the unit. 2. Remove the pre-filter by lifting up on the bottom center of the pre-filter panel. Diagram 1 3. Remove the HEPA filter by pulling on its ribbon handle. Diagram 2 4.
10 PURIFICATION STEPS TO A HEALTHY HOME These 10 Purification tips are designed to demonstrate immediate results and help expedite the purifying process in your home or office. These steps can provide amazing results and are well worth recommending to family and friends! Please note that with everyday normal use, the air purifier should be located on the highest piece of furniture in your main living area.
Keep your pores healthy with naturally sanitized clothes Dry cleaning making you sneeze? This step can help reduce and eliminate that nasty toxic residue and odor left behind in your clothing by your cleaning solutions or by the dry cleaner. A. Remove any plastic or paper wrap and hang the clothing in a closet or bathroom. B. Place your air purifier as high as possible (B-7 / G-7) or under (area model) and blowing directly (if possible) on the clothing to be sanitized. C. Turn the air purifier on.
NOTE: To purify a stinky spot on the carpet, cover the air purifier and the spot with a light sheet creating the tent effect as we did with your bedding. Make sure you don’t block the airflow through the air purifier. Mold Blast the Basement This step will amaze you as your nasty, mold and mildew-smelling basement becomes transformed into a sweet smelling pleasant place to spend time. Now, you may have to run a dehumidifier if the basement environment is really damp. Mold and mildew love dampness. A.
WARRANTY WARRANTY: SCI Resource Partners warrants this product, to the original purchaser or gift recipient, to be free from defects in workmanship and materials under normal use and service, for a period of one year from the date of purchase. LIMITATIONS: ALL WARRANTIES IMPLIED BY LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION OF THE WARRANTY SET FORTH ABOVE.
Suarez Corporation Industries Resource Partners 7800 Whipple Ave. NW North Canton, Ohio 44720-6928 1-866-786-8946 www.rppurchase.com First-Class Postage Required Post Office will not deliver without proper postage. Suarez Corporation Industries Resource Partners 7800 Whipple Ave.
