Specifications

10

On/OffThermostats
www.meitavtec.com|[e-mail]|Subjecttochangeswithoutnotice

TED24 Series
Wall-mount, 24VAC thermostats, for A/C and
Fan-Coil applications
The TED24 Series offer simple, reliable and cost effective solution
that suits commercial or residential applications to control a
large variety of HVAC systems, including Fan-Coils.
This thermostat series is one of Meitav-tec best sellers over the
years, for proven field reliability.
General Features
y Wall-mount, 24VAC thermostat
y Heat Pump or Heat/Cool configuration available –
jumper selectable
y Heat pump can be configured for heating or cooling
y Heat Output configuration – Electric or Oil/Gas
operation in Heat Mode – jumper selectable
y When working with Oil/Gas operation in Heat Mode
the internal fan operation can be disabled.
y LCD display for Ambient and Set Point Temperature
y External temperature sensor – optional
y °F or °C Temperature scale - jumper selectable
y Fault input (Dry contact)
y Compressor protection delay timer
y Suitable also for Fan-Coil applications
y Energy saving – cost effective, environmentally
environmental friendly thermostats
Model based Features
TED24-SUPER TED24-SUPER-01 TED24-AUTO-SUPER
y 1 fan speed
y Modes: Cool/Heat
y 1 fan speed
y Modes: Cool/Heat
y Special fan logic – When the unit
is OFF, the Fan will be active if the
fan switch is in "ON" position
y 1 fan speed
y Modes: Cool/Heat/Auto
New design – to be released soon