Specifications

6

On/OffThermostats
www.meitavtec.com|[e-mail]|Subjecttochangeswithoutnotice

ETN24 Series
Wall-mount, 24VAC thermostats, for A/C and
Fan-Coil applications
The ETN24 series includes fully featured, stylish thermostats with a
large, easy to read display, suitable for light commercial and
residential applications.
The ETN24 thermostats range offer control for a large variety of
HVAC systems with different configurations, including Cool Only
(C), Heat/Cool (HC) or Heat Pump (HP) with 1 or 3 fan speeds.
General Features
y Wall-mount, 24VAC thermostats
y When working with Oil/Gas in Heat Mode the internal
fan operation can be disabled
y Adjustable Set point limits for cooling and heating
(password protected)
y Compressor protection delay timer
y Auto fan (fan on demand) – optional
y External temperature sensor – optional
y Temperature display – Ambient and Set-Point, or Set-
Point display only
y Offset – for temperature reading adjustment
y Lock buttons – optional
y Silicon buttons
y Simple to use
y Energy saving – cost effective, Environmentally Friendly
algorithms and logic
y Available in various colors
Model based Features
ETN24-SUPER-SH ETN24-SUPER-SI ETN24-SUPER-SF
y 1 or 3 fan speeds – selectable
y Contact Input – Turn system off or
switch to economy mode
(adjustable set-points)
y Adjustable dead zone between
cooling and heating in auto mode
y Configurable time delay between
compressor stages
y 1 fan speed only
y Heat Pump or Heat/Cool
configuration available
y Contact Input – Turn system off or
switch to economy mode
(adjustable set-points)
y IR Remote control with timer –
optional
y Emergency heat mode available in
heat pump configuration
y 1 fan speed only
y Heat Pump or Heat/Cool
configuration available
y Contact Input – Indication only
y IR Remote control with timer –
optional
y Emergency heat mode available in
heat pump configuration
y Filter clean/replace alert with
adjustable time