Specifications

4

NamingRules
www.meitavtec.com|[e-mail]|Subjecttochangeswithoutnotice

Meitav-tec Naming Rules: (Model NUMEROCLOSUREING)
Product name is usually an abbreviation of product model, followed by various possible features,
such as operating voltage, number of Cooling/Heating stages, fan speed, or remote control.
Feature Description Abbreviation
Plastic type (shape) See next page
System type Air Condition/Fan-Coil/VAV AC/FC/VAV
Supply voltage 24VAC/110VAC/220VAC/12VDC 24/110/220/12
Fan speeds 1 Speed/2 Speeds/3 Speeds 1S/2S/3S
Separate outputs for Cool and Heat HC## (stages heat, cool)
System type (AC)
Heat Pump system (reversing valve) HP## (stages heat, cool)
Separate Proportional outputs for Cool and Heat (0-10V) P
One Proportional output for Cool and Heat PD
One Pulse Modulating output – 3 wire –open, common,
close – for both Cool and Heat
PM
Two separate Pulse Modulating outputs – 3 wire – open,
common, close – for Cool and Heat
PM2
System type (FC)
One Pulse Modulating – 3 wire – open, common, close
for Cool and one on/off output for Heat
PMH
several configurations in one product, selectable by DIP
switches
SUPER
Freeze Protection FP
Infra Red remote control – optional IR
Weekly Program (programmable) PR
Others
Special features in the product differentiate it from the
same product without the 0X name extension
01/02/03/…
Examples:
ETN24-P-PD-FC-SUPER
Shape: ETN, Voltage: 24VAC, FC Type: 1 (PD) or 2 (P) Proportional outputs, System
type: Fan-Coil (FC), DIP switch selectable configurations (SUPER)
FMT24-HP21-3S-PR-IR
Shape: FMT, Voltage: 24VAC, AC Type: Heat pump – 2 stg. Heat and 1 stage cool, Fan
speeds: 3 fan speeds, Weekly program (PR), Infra red remote control option (IR)