Specifications

14

On/OffThermostats‐Programmable
www.meitavtec.com|[e-mail]|Subjecttochangeswithoutnotice

Comparison Table
FMT-24-SUPER-FP-PROG-US
Series
ETN24-SUPER-FP-PROG-US
Series
ETN24-SUPER-FP-PROG-EU
Series
7-Days
Prog.
FMT-24-SUPER-
FP-PROG-US
FMT-24-SUPER-
2S-FP-PROG-US
FMT-24-SUPER-
3S-FP-PROG-US
ETN24-SUPER-
FP-PROG-US
ETN24-SUPER-
2S-FP-PROG-US
ETN24-SUPER-
3S-FP-PROG-US
ETN24-SUPER-
FP-PROG-EU
ETN24-SUPER-
2S-FP-PROG-
EU
ETN24-SUPER-
3S-FP-PROG-
EU
ETN24-SUPER-
PROG-7DAYS-
US
1
Program Type 5-1-1 7 Days
Events per Day 4 1
Event Settings
Start time, Set Cool
Set Heat
Start time, Set Cool
Set Heat
Start time, Stop time
1 Set point
Start
time
Stop
time
Clock type AM/PM 24 Hrs. AM/PM
# of Compressors stages 2 1 1 2 1 1 2 1 1 2
Heat Pump ● ● ● ● ● ● ● ● ● ●
# of Heat elements
(heat-cool config.)
2 2 1 2 2 1 2 2 1 2
# of Heat elements
(heat-pump config.)
1 1 - 1 1 - 1 1 - 1
Fan Speeds 1 2 3 1 2 3 1 2 3 1
2
Temperature Offset ● ● ● ● ● ● ● ● ● ●
Remote Control ○ ○ ○ ○ ○ ○ ○ ○ ○
Oil/Gas Heater ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
3
Emergency Heat ● - - - - - - - - -
Set-Point Temp. limits ● ● ● ● ● ● ● ● ●
Ambient Temp. display ● ● ● ● ● ● ● ● ● ●
External Temp. sensor ● ● ● ● ● ● ● ● ● ●
Buttons Lock – optional ● ● ● ● ● ● ● ● ● -
Freeze Protection ● ● ● ● ● ● ● ● ● -
4
Auto Fan – optional ● ● ● ● ● ● ● ● ● ●
Compressor Delay ● ● ● ● ● ● ● ● ● ●
Temperature Scale °F °F °F °F °F °F °C °C °C °C
● – standard ○ – option
1
Program Types:
US – USA type – Day is typically divided into 2 or 4 periods where the user set different set points (for both cool & heat) without ever
turning the system off.
EU – Europe type – user can program up to 4 start times and stop times (optionally with one set point – model dependent)
2
The offset is used for calibration of temperature readings.
3
Emergency heat mode is available in Heat pump configuration only.
4
When the Auto fan option is active, the fan will be active only during demand for cooling or heating.