Specifications

12

On/OffThermostats
www.meitavtec.com|[e-mail]|Subjecttochangeswithoutnotice

FMH-FC-SUPER3 Series
Flush-Mount, 24VAC, 110VAC or 220VAC for most
Fan-Coil applications
The FMH-FC-SUPER3 series allows users the flexibility of having
one main controller for most Fan-Coil applications.
It can be flush-mounted or installed directly into the Fan-Coil,
with an External temperature sensor for the return air.
General Features
y Flush-mount, 24VAC, 110VAC or 220VAC, Thermostat
y Fan-Coil supported configurations (By DIP Switch):
* 4 pipe – 2 valves
* 2 pipe – 1 valve
* no valve
y Manual Cool/Heat or Auto-Change between modes
(DIP Switch selected)
y Temperature display – Ambient and Set-Point, or Set-
Point display only (DIP Switch selected)
y Fan/Auto Fan or all time Auto Fan – (DIP Switch
selectable)
y Internal/External temperature sensor (DIP Switch
selectable)
y Adjustable Set Point Temperature limits – password
protected
y Lock buttons – password protected
y Special Input can be used for:
* Auto-change over sensor – mode is set based on
temperature of the incoming water flow, ideal for 2-
pipe systems.
* Contact input for a remote switch, which sets the
mode of one or more thermostats linked together
(available only for 2-pipe systems).
* Contact input to activate Economy Mode – unit
works according to pre-determined economy set
points
* Contact input to turn the unit Off
y Energy saving – cost effective, environmentally friendly
thermostat
y Available in different colors
y Also available with Proportional (0-10VDC) Valves
output – FMH-P-FC-SUPER model
Wiring Diagram