Owner`s manual

21
10. General Purpose Output – "OUT, OUT"
Normally open, dry contact, general purpose output that can be activated manually or by
phone command.
The output can be connected to a boiler, or other consumer, and can be activated remotely
using phone command when you are NOT in the house.
The output can be controlled using 3 commands:
A. Turn the output ON.
B. Turn the output OFF.
C. Activate the output for a set number of hours.
10.1 Manual Operation of the output.
• Press the Select button several times until "t ##" will appear on display
(where ## stands for number of hours – two digits).
• Using the “+” or “-” buttons, adjust the number of hours for the output to be
ON (starting from present time) – range 01…23 hours.
Set the number to "00" to turn the output OFF.
Set the number to "24" to turn the output ON without time limitation.
• Press the Select button again for the command to take affect and to return to
normal display.
* The output can be activated through the phone – please refer to section #15.