Owner`s manual

13
In auto change-over mode – a solid non-flashing “|” sign will appear next to the
mode to indicate that the current displayed set-point temperature is of that
mode.
A flashing “|” sign next to the mode will appear during demand for cool or heat.
TEMPSET
COOL
HEAT
TEMPSET
COOL
HEAT
Display of set-point temperature for heat
Display of set-point temperature for cool
TEMPSET
COOL
HEAT
TEMPSET
COOL
HEAT
Heating mode active
Cooling mode active
5.5 Selecting fan/auto fan
Press the Auto Fan button to switch between:
• FAN ON – The fan will work continuously.
• Auto Fan – The fan will work according to cooling/heating demand (“AUTO
FAN” appears on display)
In Oil/Gas systems, in heat mode, switching to Auto Fan mode